Products / Behringer Bandsaws / Plate and Block Bandsaws / LPS-T

Table Bandsaw LPS-T

The compact vertical band saw - ideal for toolmaking and test cuts

With its moveable support table, the easy-to-use LPS-T vertical bandsawing machine is the all-rounder when it comes to sawing small, compact parts and short sections – i.e. those typically needed in toolmaking. Sample cuts and notching work on difficult-to-machine material are also part of its repertoire. What is more: due to the compact dimensions the LPS-T can also be set up in areas with limited space.

Behringer Tischbandsäge LPS-T

LPS-T

Unsurpassed precision (video)

Behringer Tischbandsäge LPS-T Messeinrichtung mit NC-Positionierung

NC measuring unit (option)

Behringer Tischbandsäge LPS-T Tischpositionierung und Sägevorschub durch Servomotor

Table positioning via ball screw spindle

Product video LPS-T

Behringer Tischbandsäge LPS-T intuitive Steuerung mit Touch-Screen

Intuitive BT65 touch control

Behringer Tischbandsäge LPS-T Späneförderer

Chip conveyor with integrated coolant tank

Sonderlösung: Ringsäge auf Basis der Behringer Tischbandsäge LPS-T

A special solution: the ring saw

Features of the LPS-T

  • Unsurpassed precision and cutting performance
    The high cutting accuracy, quiet running and long blade life are all down to the special torsion resistant design of the saw frame. In comparison to plate and block bandsaw machines from other manufacturers, the force for the saw feed is applied directly beneath the cutting point, which results in feed movements that are considerably more accurate.

  • Servo Feed System
    The Behringer servo feeding system ensures constant chip removal and makes better use of the capabilities of modern bandsaw blades. The rapid response of the servo feeding system to the sensors for the cutting pressure regulation systematically prevents overloading and premature wear of the bandsaw blades.

  • Chip conveyor standard
    A generously sized chip conveyor with integrated coolant tank is located under the saw unit, directly in the chip flow direction. Any chips and coolant are collected here and separated. The conveyor can be moved out of the machine frame for cleaning and maintenance.

  • Movable material support table
    For easy loading and unloading by crane, the material table can be moved out from under the saw unit.

  • NC measuring unit
    The LPS-T can be equipped with an optional NC-controlled measuring unit. The cutting depth is digitally pre-programmed in the control system. When placing down the material to be cut, it can be easily aligned with the measuring device and then securely clamped. This considerably speeds up the setup process.

  • Quick bandsaw blade change
    Quick and easy – tool-free bandsaw blade changes mean shortest set-up times. Just a few simple steps are all that is needed to change the bandsaw blade.

  • Cast iron band guiding parts
    are made by Behringer and provide vibration damping directly at the cutting edge, thus increasing tool life.

  • Compact
    Due to its compact dimensions, it can also be set up in constricted spaces.

Individual Configuration

The LPS-T can be configured perfectly to your requirements with numerous options. This is how you get the most out of your production. Our experts will be pleased to advise you. We look forward to your inquiry.

Contact

Technical Data LPS-T

Cutting length 50.0 in
Cutting width 24.4 in
Cutting height 23.6 in
Minimum cutting width 0.2 in
Minimum cutting height 0.4 in
Drive power 5.4 hp
Blade speed 56 - 394 fpm
Saw blade dimensions 225.6 x 1-5/8 x 0.05 in
Total power 8.0 hp
Supporting area inside table 49.6 in x 25.2 in
Supporting area outside table 49.6 in x 25.2 in
Length 114.2 in
Width 108.3 in
Height 122.9 in
Weight 7,050 lbs
Material support height 45.3 in

We look forward to getting in touch with you.

You have questions about our product range, need technical advice or you are looking for a sales partner near you?

Call us or send us an e-mail. We will be happy to advise you.

ContaCt

 
Reset