PSU 450 SERIES AUTOMATIC MITER CIRCULAR COLD SAWS:
Thanks to the material feed unit and optional automatic mitering (on the VES model), the PSU 450 VE and VES run in the automatic mode. With its optimized sawing parameters, the newly designed clamping system with self-adjusting clamping units and PLC controls, the PSU 450 VE is ideally suited for single piece and mass production.
The PLC control of the PSU 450 NC1 offers user friendliness and extremely short programming procedures for a reliable automatic operation. Only the number of pieces to be cut and the length of the pieces to be cut need to be entered into the program. Miter angles within the range of left and right hand side up to 30° acute angle can be adjusted manually. The NC longitudinal axis positions the feed grippers by a servo motor, ball screw spindle and encoder.
STANDARD FEATURES:
The saw unit is provided with a completely hydraulically controlled, variably adjustable drive with electric stroke limitation by potentiometers for both directions, upward and downward. The robust saw unit combined with a powerful gearbox and rapid positioning times ensure short cycle times. Other feature include:
- PLC-control
- Pole-changing, three-phase, 2-speed motor
- Saw blade speed 46/92 SFM (450 VE / VES); 26/52 SFM (450 NC 1)
- Self-adjusting clamping units
- Clamping units are equipped with clamping-pressure reduction controls
- Raisable material feed unit
- Flood coolant system
- Hydraulic system
OPTIONS:
The machines of this series are not only available in a wide range of available equipment variants, they can also be tailored to your very own specific requirements:
- Speed range of 28/56/112/224 SFM (other speed rates upon request)
- Frequency controlled drive (450H)
- Horizontal clamping devices
- Spray mist coolant system
- Chip conveyor
- Chip wheel holder and chip wheels
- Mechanical and electronic length measuring systems
- Roller conveyors
- And many more additional optional features
